Codan Radio P25 Training Guide - Manual (Page 75)

P25 RADIO SYSTEMS | TRAINING GUIDE
Chapter 5: Conventional Fixed Station Interface Page 67
Function Tones used for additional control of the fi xed station are shown in Table 5-1:
Tone Function Secondary Function
2050 Hz Monitor Receiver
1950 Hz Transmit Channel 1
1850 Hz Transmit Channel 2
1350 Hz Transmit Channel 3 Select Digital mode
1250 Hz Transmit Channel 4 Select Analog mode
1150 Hz Transmit Channel 5 Select Secure mode
1050 Hz Transmit Channel 6 Select Clear mode
1750 Hz Transmit Channel 7 Second receiver off
1650 Hz Transmit Channel 8 Second receiver on
1550 Hz Repeater mode off
1450 Hz Repeater mode on
Table 5-1: Tone Remote Control Function Tones
Although secondary functions can be used to select Analog / Digital and Secure / Clear modes, these
modes can be pre-programmed in the fi xed station on a per channel basis.