Compuprint 9050 LAN Installation - Manual (Page 10)

Selecting LAN Interface in the Printer Setup
It is necessary to configure the printer to the LAN connection.
The printer configuration is performed using the operator
panel.
The functions concerning the LAN interface are selected in the
printer Power-On Configuration setup described in the User
Manual included in the Printer Documentation & Driver CD-
ROM.
Printing Power-On Configuration Setup Page
If you want to see the current LAN interface setting, print the
Power-On Configuration setup page as follows:
1. Make sure that the printer is turned off.
2. Press and hold the
PROGRAM key pressed while
powering on the printer until the RELEASE KEY
message is displayed. As soon as the
PROGRAM key gets
released, the following message will be displayed:
PRINT OUT? NO
3. Press the → key, the following message will be
displayed:
PRINT OUT? YES
4. The printout starts.
10 78413025-001