Compuprint 9050 LAN Installation - Manual (Page 53)

784103025-001 53
configuring an AS/400 for printing requires
ith a print job.
the
Configuring AS/400 for Printing
The procedure for
that you:
1. Setup the printing capability
2. Verify the setup w
In order to accomplish this configuration, you need
following information:
a) Remote Printer Queue Name
Set for any of ‘pr1’ through ‘pr4’.
The Remote Printer Queue name must be all lower case.
b) IP Address
See the IP Address value set in the INIT IP ADDRESS
Setting up Printing for ASCII Files
The next step in configuring the AS/400 is to setup the remote
printing capability. There are two ways to do this:
• you can specify the LPR parameters manually each
time you send a file to the printer.
• use remote writer and a remote output queue for
automatic printing to the printer.
parameter of the LAN INTERFACE item in the Power-On
Configuration setup you find in the User Manual
included in the Printer Documentation & Driver CD-
ROM.