Comtech EF Data SMS-301 - Manual (Page 46)

Operation SMS-301 Redundancy Switch
3-8 Rev. 3
Press [
↑] or [↓]
to change the parameters. After the display represents the correct
parameters, press [ENTER] to execute the change. This action initiates the necessary
programming by the 1:1 switch.
To undo a parameter change prior to execution, press [CLEAR].
The following notes describe each configuration function in detail.
Notes:
1. Figure 3-3 through Figure 3-12 list the front panel menu window selections.
2.
Menus or commands that are specific to certain 1:1 switch configurations are
only accessible after selecting the appropriate 1:1 switch configuration. This
prevents incompatible parameters from accidentally being selected.