6 faults/alarms – Comtech EF Data SMS-301 User Manual

Page 57

Advertising
background image

SMS-301 Redundancy Switch

Operation

Rev. 3

3-19

3.5.1.6 Faults/Alarms

Refer to Figure 3-9.

The Faults/Alarms level is accessible from the Function Select menu. Press [

←] or [→]

to move between the following Faults/Alarms groups:

OPERATIONAL
X

(Status Only)

X = 0 through 9.

Displays the fault status of the currently selected on-line modulator and
demodulator.

When a fault is present, the date and time of the fault is displayed alternately.
(Status Only)

Note: Date and time faults are also displayed.

Use [

←] or [→] to display faults within the 1:1 switch, such as the following:

COMMON

•

Battery Clock - Battery or clock fault.

•

+12V Supply - +12V supply fault.

•

+5V Supply - +5V supply fault

•

Power Supply #1 - Power supply #1 fault.

•

Power Supply #2 - Power supply #2 fault.

•

Controller - Controller power ON/OFF cycle fault.

•

Modem COMM Link - Modem communications fault.

•

Modem Verify- Prime and backup modems do not match.

•

DEMOD Verify - Prime and backup DEMODS do not match.

•

Interface Module - Interface module is missing or will not program
fault.

Advertising