Chapter 1. introduction, 1 introduction, 2 standard features – Comtech EF Data CME-5200 Manual User Manual

Page 13

Advertising
background image

Chapter 1. INTRODUCTION

Figure 1-1. CME-5200 Digicast Media Router ASI-R – Front Panel

1.1 Introduction

The Comtech EF Data (CEFD) CME-5200 Digicast Media Router ASI Receiver –
referred to throughout this manual as “the ASI-R” – is an economical ASI-to-IP Receiver
providing price-versus-performance unparalleled in today’s market.

The ASI-R receives Multiprotocol Encapsulated (MPE) packets (as specified in ETSI EN
301 192) over an MPEG-2 Asynchronous Serial Interface (ASI) input and decapsulates
Ethernet/IP Unicast or Multicast packets. Additionally, the ASI-R can be configured to
provide transport stream (TS) over IP.

1.2 Standard

Features

Based on an embedded architecture utilizing a MIPS CPU and eCOS Operating System,
the ASI-R provides the following features:

High Reliability

ASI Input at rates as high as 213 Mbps

Ethernet Egress Rate as high as 85 Mbps (1,500 byte packets)

Support for Multicast and Unicast IP datagrams

MPE Section Packing and Non-Section Packing on a PID-by-PID basis

Support for Transport Stream over IP

Support for all valid PIDs in 8192 range

64 PIDs

1–1

Advertising