Comtech EF Data CME-5200 Manual - Manual (Page 25)

CME-5200 Digicast Media Router ASI Receiver Revision A
Device Management via User Interfaces MN/MRASIRCDC.IOM
IMPORTANT
Beginning with the Administrative Configuration page (Figure 4-3), all
pages containing configurable parameters feature a login dialog box at
the bottom of the page. Changes to the ASI-R configuration will not be
accepted without a valid user name and password.
The ASI-R Administrative Configuration page contains the following configurable
parameters:
User Name
The ASI-R’s User Name is user configurable and is used for connecting to the
unit via IP management services.
The default user name is
comtech
.
Password
The ASI-R’s Password is user configurable and is used for authenticating a user
when connecting via IP management services. The password is case sensitive and
must be entered carefully.
When the password is changed, the user will be prompted to enter the password
twice to verify it is correct.
The default password is
comtech
.
System Contact
Contact information of the system administrator for support.
System Location
The physical location where the unit has been installed.
Enable Telnet
Enables Telnet application on the ASI-R.
SNMP IP Address
Defines the SNMP server that can connect to the unit.
Login Required
A user name and password are required to make any changes to the ASI-R
configuration.
Update Firmware
Allows software/firmware changes to be made. User name and password is
required for security.
4-3