A.2 web interface – Comtech EF Data CME-5200 Manual User Manual
Page 46
CME-5200 Digicast Media Router ASI Receiver
Revision A
Software Upgrade
MN/MRASIRCDC.IOM
A.2 Web
Interface
Access the
Administrative Configuration
menu (Figure A-1):
a) In
the
Update Firmware
section, enter the
Unit TFTP Server IP Address
.
b) Select
Application
or
FPGA
for the
Image Type
to be upgraded.
c) Enter a valid username and password in the
Login Required
section (below
the
Update Firmware
section) then select
Update
. The software update will
begin to download.
IMPORTANT
Do
NOT power the unit down during the upgrade process.
d)
When the update is complete, the message “
Press any key to continue
”
will be displayed.
e)
Once the unit is upgraded, reset the unit by entering a valid username and
password in the first
Login Required
section, then selecting
Reset Unit
.
Figure A-1. TFTP Download (via Web)
A–2