Comtech EF Data CME-5200 Manual - Manual (Page 42)

CME-5200 Digicast Media Router ASI Receiver Revision A
Device Management via User Interfaces MN/MRASIRCDC.IOM
4.4 Telnet Interface
Telnet provides a textual interface over a LAN. Most PCs have the capability to use
Telnet. To use Telnet on a Microsoft Windows
®
product, click , then .
The Run dialog box is shown in Figure 4-28. In the Open: text window, enter “telnet
xxx.xxx.xxx.xxx,” where xxx.xxx.xxx.xxx is the IP address of the ASI-R. If the port
number has been modified from the
Standard 23 via the Terminal Interface, then the port
number must be appended with a colon to the IP address.
Figure 4-28. Starting Telnet Session
The user will be prompted to enter the user name and password to gain access to the
telnet interface.
NOTE
The default username is
comtech
and the default password is
comtech
, both of which are case sensitive.
Once the menu is started, press <ENTER> and the ASI-R Main Menu will display as
shown in Figure 4-29:
Figure 4-29. Main Menu via Telnet
The user may navigate the menus in the same manner as the Terminal Interface. With
specific exceptions as noted in the Terminal Interface section, the menus available via
Telnet and Serial interfaces are identical.
4-20