Comtech EF Data CiM-25/9000 - Manual (Page 33)

CiM-25/9000 IP Enabled M&C Rev. 1
Operation CD/CIM259000.IOM
15
3.3.2.4 R
EAD
O
NLY
N
AME AND
P
ASSWORD
The factory defaults for these parameters are monitor and 1234 respectively. The Name
field can be any alpha-numeric combination with a minimum length of 4 characters and a
maximum length of 10 characters. The Password field can be any alpha-numeric
combination with a minimum length of 4 characters and a maximum length of 10
characters.
3.3.2.5 H
OST
A
LLOW
L
IST
The Host Allow List can be configured as any of the following combinations:
1 to 6 individual IP addresses.
1 to 3 ranges of IP addresses.
A combination of individual and range addresses.
The Administrator simply checks the Range Yes radio button next to the group of two IP
addresses that constitute the beginning and ending of the range.
3.3.2.6 PING E
NABLE
/ D
ISABLE
The factory defaults for this parameter is Enabled. The radio buttons allow the
Administrator to choose between Enabled and Disabled.
3.3.2.7 C
I
M-25 IP A
DDRESS
, G
ATEWAY AND
M
ASK
The factory defaults for these parameters are 10.6.30.1, 0.0.0.0, and 255.255.0.0
respectively. The Administrator can change these as required.
3.3.2.8 MAC A
DDRESS
This is a READ ONLY parameter and can not be changed.
3.3.2.9 DNS S
ERVERS
The Administrator can assign both a primary and secondary DNS server IP address.
3.3.2.10 SMTP D
OMAIN
N
AME AND
IP A
DDRESS
The Administrator can assign the SMTP Domain Name and Domain IP Address. This is
required if the E-mail feature of the Support Page is to be used.