Comtech EF Data CiM-25/9000 User Manual
Page 49
CiM-25/9000 IP Enabled M&C
Rev. 1
Operation
CD/CIM259000.IOM
31
Query Format:
!DN ?
Response:
!DN <primary DNS IP Address> <secondary DNS IP Address>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.12 C
HANGE
SMTP D
OMAIN
N
AME
Using the !SN command, the Administrator can set the SMTP domain name. The
command protocol for this command is as follows:
Format:
!SN <string>
Response:
Command Successful
Where:
<string> can be any alphanumeric string with a length of 1 to 100
characters.
Note:
disabled in the <string> field disables SMTP.
Query Format:
!SN ?
Response:
!SN <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.13 C
HANGE
SMTP D
OMAIN
IP A
DDRESS
Using the !SD command, the Administrator can set the SMTP Domain IP Address. The
command protocol for this command is as follows:
Format:
!SD <ip_address>
Response:
Command Successful
Note:
An IP Address of 0.0.0.0 disables SMTP.
Query Format:
!SD ?
Response:
!SD <ip_address>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.14 C
HANGE
HTTP P
ORT
Using the !PT command, the Administrator can set the HTTP Port. The command
protocol for this command is as follows:
Format:
!PT <value>
Response:
Command Successful
Where <value> can be any number in the range of 0 to 65535