Comtech EF Data CiM-25/9000 User Manual
Page 51
Advertising
CiM-25/9000 IP Enabled M&C
Rev. 1
Operation
CD/CIM259000.IOM
33
3.5.2 U
SING
T
ELNET WITH
E
QUIPMENT
R
EMOTE
C
ONTROL
P
ROTOCOL
The CiM-25/9000 Telnet interface will accept any command defined in the particular
interfacing equipments Remote Control Specification. See the equipments Operation
Manual for details regarding the available commands and the message protocol. The
screen dump below show an example of how to directly use the equipments Remote
Control Protocol to communicate to the equipment via the Telnet interface.
Advertising