Comtech EF Data CiM-25/9000 User Manual
Page 47
CiM-25/9000 IP Enabled M&C
Rev. 1
Operation
CD/CIM259000.IOM
29
3.5.1.5 C
HANGE
R
EAD
/W
RITE
N
AME
Using the !WN command, the Administrator can change the Read/Write login Name. The
command protocol for this command is as follows:
Format:
!WN <string>
Where:
<string> can be any alphanumeric string of length 4 to 10 characters
Query Format:
!WN ?
Response:
!WN <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.6 C
HANGE
R
EAD
/W
RITE
P
ASSWORD
Using the !WP command, the Administrator can change the Read/Write login Password.
The command protocol for this command is as follows:
Format:
!WP <string>
Where:
<string> can be any alphanumeric string of length 4 to 10 characters
Query Format:
!WP ?
Response:
!WP <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.7 C
HANGE
R
EAD
O
NLY
N
AME
Using the !RN command, the Administrator can change the Read Only login Name. The
command protocol for this command is as follows:
Format:
!RN <string>
Where:
<string> can be any alphanumeric string of length 4 to 10 characters
Query Format:
!RN ?
Response:
!RN <string>
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25