Comtech EF Data CiM-25/9000 - Manual (Page 50)

CiM-25/9000 IP Enabled M&C Rev. 1
Operation CD/CIM259000.IOM
32
Query Format: !PT ?
Response: !PT <value>
Notes: 1. The default port is set to 80.
2. Changes made via this command do not become active until the user has sent
a !EE command to commit the changes to EEPROM of the CiM-25
3.5.1.15 C
HANGE
SNMP T
RAP
A
DDRESS
Using the !TP command, the Administrator can set the SNMP Trap Address. The
command protocol for this command is as follows:
Format: !TP <ip_address>
Response: Command Successful
Note: An IP Address of 0.0.0.0 disables the trap
Query Format: !TP ?
Response: !TP <ip_address>
Note: Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25
3.5.1.16 C
HANGE
SNMP T
RAP
C
OMMUNITY
Using the !TC command, the Administrator can set the SNMP Trap Community. The
command protocol for this command is as follows:
Format: !TC <string>
Response: Command Successful
where <string> can be 0 - 20 characters
Query Format: !TC ?
Response: !TC <string>
Note: Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.