Daktronics Sportsound Indoor (SSN-100/150) - Manual (Page 18)

12 Electrical Installation
4.2 Amplifier Presets
Depending on the speaker system, the amplifier in the control enclosure is set to a different
preset program (Figure 19). This is set in the factory and should not have to be modified.
However, if the wrong program is set, it can be changed as described below.
1. To unlock the menu, hold Prev and Next until the screen says “unlocked”.
2. Press Set/Enter and the word “PRESET” will begin to flash.
3. Press Set/Enter again to enter the list of presets in the amplifier.
4. Press Next or Prev until the screen displays the correct preset for the sound system.
5. Press Set/Enter to confirm the chosen preset.
6. Hold Prev and Next until the screen says “locked”.
SSN-100 SSN-150
Figure 19: Amplifier Presets