Dataprobe iBoot-G2 Operation Manual - Manual (Page 25)

V140506E iBoot-G2+ Page 25
f. Control Power from the Cloud
The status screen will detail all the iBoots
registered with the cloud. You can add locations
and group iBoots by location.
Each iBoot displays the power status and
AutoPing if configured.
Click on the box that holds the Activation Code for
the device you just entered. A modal box will
appear with options to rename the device, move
the device to a defined location or delete the
device.
Give the device a name, and Click Rename Device.
The remainder of the modal is very similar to the iBoot web page.
Select Power ON, Power OFF or Cycle Power.
g. Assign Names and Locations
You can establish multiple locations and assign each
iBoot to a location. You can also name each iBoot
independently from the Device Name that is displayed
on the iBoot web page. To add locations, click on the Locations button on the menu bar, and then click Add
Location. Name the location and click the Add Location button.