Dataprobe iBoot-G2 Operation Manual - Manual (Page 36)

V140506E iBoot-G2+ Page 36
13. Specifications
13.1. Physical
Height
2.0” 60mm
Weight 8.6 oz 244g
Width
3.2” 82mm
MTBF 320,000 hours
Depth
4.2” 107mm
Temperature 0 – 50 degrees C
13.2. AC
Input IEC 320 C14
Input Cord 16AWGX3C 10A 250 UL/CSA/VDE Rated (1.25mm2X3C)
Voltage Range Auto Sensing 105-240 VAC
Switched Receptacle IEC 320 C13
Capacity 12 A Max at 105-125 VAC, 10 A Max at 210-240 VAC
13.3. Expansion Ports
Power V+ Power Out This is +12 VDC power out from the iBoot-G2+
Maximum current 100 mA
Feedback I Input Input for status signals. Dry Contact input or Open
Collector.
Ground G Ground Signal Ground for Input and Output
Command O Output 2N3904 NPN Transistor. 100 mA Maximum
13.4. Compliance
UL/cUL UL60950 Listed I.T.E
File No. E225914
CE Directives 89/336/EEC, 92/31/EEC and 93/68/EEC
EN 60950: 3rd Edition
EN 55022: 1998 Class B
FCC Part 15 Class B
13.5. Communications
Dual 10/100 Unshielded Twisted Pair Ethernet Jacks.
IP Addressed, DHCP assigned or Static
Internal HTTP Web Server
Telnet Server
USB: Com port 9600bps. 8 data bits. No parity. 1 Stop bit. No Flow Control.