Chapter 3 – DFI HU101 User Manual
Page 43
www.dfi .com
43
Chapter 3 BIOS Setup
Chapter 3
Ipv4 PXE Support
When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not
be created.
Ipv6 PXE Support
When enabled, Ipv6 PXE boot supports. When disabled, Ipv6 PXE boot option will not
be created.
Intel(R) Ethernet Connection I218-LM - 88:88:88:88:87:88...
This section is used to configure the parameters of the Gigabit Ethernet device.
Confi gure Boot Protocol,
Wake on LAN, Link
Speed, and VLAN.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PORT CONFIGURATION MENU
NIC Confi guration
Blink LEDs
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID
Bus: Device: Function:
Link Status
MAC Address:
Advanced
0
Intel(R) PRO/1000 5.5.19
FFFFFF-OFF
Intel PCH LPT
155A
00:19:00
[Disconnected]
88:88:88:88:87:88
Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit
Blink LEDs
Identifies the physical network port by blinking the associated LED.
Link Status
This field indicates the link status of the network device.