DFI HU101 - Manual (Page 44)

www.dfi .com
44
Chapter 3 BIOS Setup
Chapter 3
NIC Configuration
This field is used to configure the Boot Protocol, Wake on LAN, Link Speed and VLAN.
Specifi es the port speed
used for the selected boot
protocol
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Link Speed
Wake on LAN
Advanced
[Auto Negotiaed]
[Enabled]


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit
Link Speed
This field is used to specify the port speed used for the selected boot protocol.
Wake on LAN
Enables the server to be powered on using an in-band magic packet.
Intel(R) I210 Gigabit Network Connection - 00:01:29:50...
This section is used to configure the parameters of the Gigabit Ethernet device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PORT CONFIGURATION MENU
 NIC Confi guration
Blink LEDs
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID
Bus: Device: Function:
Link Status
MAC Address:
Virtual MAC Address
Advanced
0
Intel(R) PRO/1000 5.5.19
001300-000
Intel i210
1533
02:00:00
[Disconnected]
00:01:29:50:49:6D
00:01:29:50:49:6D
Blink LEDs
Identifies the physical network port by blinking the associated LED.
Link Status
This field indicates the link status of the network device.
Virtual MAC Address
Programmatically assignable MAC address of the Ethernet port.


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit
Confi gure Boot Protocol,
Wake on LAN, Link
Speed, and VLAN.