Chapter 3, Chapter 3 bios setup – DFI KB160 User Manual
Page 37
www.dfi .com
37
Chapter 3 BIOS Setup
Chapter 3
Enable or Disable Serial
Port (COM)
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.
Serial Port 2 Confi guration
Serial Port
Device Settings
Change Settings
Advanced
[Enabled]
IO=3E8h; IRQ=10;
[Auto]
RS485 Auto Flow Support
Enables or disables the auto flow support.
Serial Port
Enables or disables the serial port (COM).
Change Settings
Selects the IO/IRQ setting of the I/O device.
Enable or Disable Serial
Port (COM)
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.
Serial Port 3 Confi guration
Serial Port
Device Settings
Change Settings
Advanced
[Enabled]
IO=2E8h; IRQ=11;
[Auto]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
NCT6106D HW Monitor
This section displays the monitor hardware status.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.
PC Health Status
Smart Fan Function
SYS
Temperature
CPU
Temperature
SysFan
Speed
CPUFan
Speed
VCORE
APU VDDNB
DDR3 Voltage
+12V
Advanced
[Disabled]
: +31.5 C
: +38.0 C
: N/A
: +6750 RPM
: +1.040 V
: +0.944 V
: +1.504 V
: +12.144 V
Enable or disable Smart
Fan
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit