Quad amp basic specifications, Physical specifications, Electrical specifications – Delta Tau 3Ax-602646-xUxx User Manual

Page 6: 120v/208v/230v quad amplifier specifications

Advertising
background image

Quad Amp Hardware Reference Manual

Introduction

2

Quad Amp Basic Specifications

Physical Specifications

Size (See Figure 1)

Height: 22.0 Inches

Width: 10.5 Inches

Length:
5.125 Inches (without mounting option)
9.031 Inches (with mounting option)

Weight

60 lb. (27.3 kg)

Temperature
Storage: -20 degrees C to +85 degrees C
Operating: 0 degrees C to +60 degrees C (Unit is disabled if heat sink temperature exceeds 80 degrees C)

Relative Humidity
10% to 95%, non-condensing

Electrical Specifications

Switching Frequency
7.5 kHz (Nominal)
15 kHz (Maximum)

Cooling
Options 3B, 4, and 4A: Forced Air (Internal)
Options 3 and 3A: Customer supplied (external)

Protection
Fuses:
F201 - Shunt Regulator IGBT and Shunt Resistors
F202 - Logic Power Supply
3-Phase In-Line Circuit Breaker (Optional)

Bus Supply, Control Supply and Shunt Specifications

120V/208V/230V Quad Amplifier Specifications

Main AC Input Voltage/Current (L1, L2, L3)
Input

voltage

120 VAC, single phase
208 VAC, three phase
230 VAC, three phase

For demo only

Input current/phase, continuous.

25 A @ 12.5 HP continuous output
60 A @ 25 HP continuous output
72 A @ 33 HP continuous output

Frequency

50/60 Hz

±2

Control AC Input Voltage/Current (Connector
C3)
(Dependent on Option Ordered)

Input voltage (Selectable)

120 VAC (+/- 10 %), single phase
208 VAC (+/- 10 %), single phase
230 VAC (+/- 10 %), single phase

Min. required input current (RMS)

3 A @ 120VAC
1.5 A @ 230 VAC

Frequency

50/60 Hz

±2

Advertising