Table grate installation (optional) – DR Power Hydraulic 20-Ton User Manual
Page 18
Advertising
14
DR
20-Ton WOOD SPLITTER Safety & Operating Instructions
Table Grate Installation (Optional)
The following procedure is for the installation of the optional Table Grate (Figure 11) on
the DR 20-Ton WOOD SPLITTER.
The tubular steel Table Grate installs behind the splitting wedge by simply sliding the box-
shaped grate supports into the open end of the wood splitter frame (Figure 12). This enables
convenient repositioning for the second pass on large pieces. Wood chips and debris will
fall through the grate, providing a cleaner finished product.
Figure 11
WARNING! Always remove the Table Grate before transporting the splitter.
Figure 12
Grate Supports
Advertising