Eizo DuraVision FDS1904 取扱説明書 - Manual (Page 25)

5
En
gli
sh
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact
your local EIZO representative.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• EIZO LCD Utility Disk (CD-ROM)
• Setup Manual (this manual)
• Cleaning cloth
Controls and Functions
1 2 4 5 7 9 10 6 8
13
3
12
24V 2.7A － ＋
11
1. ECDIS Indicator When the monitor brilliance is set to the ECDIS adjustment value, the letters “ECDIS”
light up in green. When the brilliance is higher than the ECDIS adjustment value, the “+”
will light up in red, and when it is lower the “-” will light up in red.
2. (RETURN) button *1 Cancels the setting/adjustment and exits the Adjustment menu.
3. (BRILLIANCE)
button *1
Adjusts the brightness (brilliance).
4. (ENTER / MENU)
button *1
Displays the Adjustment menu, determines an item on the menu screen, and saves
values adjusted.
5. button *1 Turns the power on or off.
Attention
• Press for 5 seconds or more to turn off the power.
(A preliminary message for powering off appears.)
6. Power input Left: AC power connector / Right: DC power terminal block
7. Output signal
connector
D-Sub mini 15-pin connector
8. Input signal connector Top: D-Sub mini 15-pin connector / Bottom: DVI-D connector
9. RS-232C port D-Sub 9-pin (female) connector: For monitor control
10. RS-232C port
(for FDS1904T only) *2
D-Sub 9-pin (male) connector: For touch panel control
Connects a PC and monitor via a RS-232C cable when this product is used as a
touch panel monitor.
11. USB port
(for FDS1904T only) *2
Upstream port: For touch panel control
Connects a PC and monitor via a USB cable when this product is used as a touch
panel monitor.
12. Cable holder (2) Fixes cables in place to prevent disconnection.
13. mark Functional earth terminal
*1 These buttons light up orange when the monitor is turned on.
*2 These ports cannot be used at the same time. When cables are connected to both ports, the USB port is
prioritized.