Specifications – ESI ESP1010 User Manual
Page 29
ESP1010
11. Specifications
<Analog Audio>
1. Analog Inputs
1) Connector Type:
1/4" female TRS-type, balanced or unbalanced (ch 1~8)
2) Peak level:
0dBFS @ +6.5dBV (-10dBV nominal)
3) Impedance:
10k ohms minimum
4) Att. & Gain Control:
-60dB ~ +15dB (0.5dB step size) *ch1, 2ch only
2. Analog Ouputs
1) Connector Type:
1/4" female TS-type, unbalanced (ch 1~8)
2) Peak level:
+6.2dBV @ 0dBFS (-10dBV nominal)
3) Impedance:
100 ohms
4) Attenuation Control:
-60dB ~ 0dB (0.5dB step size)
3. Mic Preamplifier
1) Peak level:
0dBFS @ -40dBV
2) Gain Adjustment:
Gain +31dB up + -60 ~ +15dB (0.5dB step size)
3) +12V phantom power supply from PCI Card
+48V phantom power supply from RACK (XLR connector only)
4. Headphone Amplifier
1) Load Impedance Range: 32-300 ohm (for the best performance)
2) Output Power:
125mW @ 32ohm per channel
<Digital Audio>
- 29 -
29