Pci card – ESI ESP1010 User Manual
Page 7
Advertising
![background image](/files/783011/content/doc007.png)
ESP1010
4) D-SUB – Connect to 44pin D_SUB cable (Do not use any cable except
the original cable by ESI).
5) External Power – DC9~12V 300mA. You must connect an external DC
adaptor if using +48V Phantom power. Please always check the polarity.
NOTE: To prevent damage to your equipment, do not use a DC adaptor with
less than 300mA or more than 12V..
2. PCI Card
- 7 -
7
Advertising