ESI ESP1010 User Manual
Page 30
ESP1010
1. Internal 20ch /36-bit Digtal Mixer(Input 10ch/Output 10ch)
2. Sample rate supports:
(22.05,24)*,32,44.1,48,88.2,96kHz : *analog only
3. A/D Converter
1) Signal to Noise Ratio:
107dB (A-weighted) @ fs=48kHz
2) Dynamic Range:
107dB (-60dBFS with A-weighted) @ fs=48kHz
3) S/(N+D)(-1dB):
100dB @ fs=48kHz
4) Interchannel Isolation:
-110dB
5) Resolution:
24-Bit
4. D/A Converter
1) Signal to Noise Ratio:
112dB (A-weighted) @ fs=44.1kHz
2) Dynamic Range (S/N):
112dB (60dBFS with A-weighted) @ fs=44.1kHz
3) THD+N:
-94dB @ fs=44.1kHz
4) Interchannel Isolation:
-100dB
5) Resolution:
24-Bit / 96kHz
5. Digital Input
1) Connector Type:
RCA (provided via I/O cable)
2) Format:
IEC-60958 Consumer (S/PDIF coaxial)
3) Sampling Rate:
44.1,48,88.2,96kHz
4) Resolution:
24-Bit
6. Digital Output
1) Connector Type:
RCA (provided via I/O cable), Optical (on board)
2) Format:
IEC-60958 Consumer (S/PDIF coaxial)
3) Sampling Rate:
44.1,48,88.2,96kHz
4) Resolution:
24-Bit
<MIDI>
7. MIDI I/O
1) 2-in, 2-out; 32 MIDI channels in and out
2) Connector Type: MIDI1- Standard MIDI 5-pin DIN (provided via I/O cable)
MIDI2- Standard MIDI 5-pin DIN (provided via Rack)
- 30 -
30