Faronics Device Filter Mac - Manual (Page 28)

28
Examples:
1. status task - /Library/Application\ Support/Faronics/DeviceFilter/CLI “admin”
“password” status
Where /Library/Application\ Support/Faronics/DeviceFilter/CLI is the installation
location of the program, admin is the confgured user name, password is the confgured
password, and status is the desired command.
2. setUSBOptions task - /Library/Application\ Support/Faronics/DeviceFilter/CLI
“admin” “password” setUSBOptions 0-3 size
Where /Library/Application\ Support/Faronics/DeviceFilter/CLI is the installation
location of the program, admin is the confgured user name, password is the confgured
password, setUSBOptions is the desired command, 0-3 (corresponding to the desired option
found on the USB tab of the preference pane - 0 =Disallow Mounting, 1 =Allow Mounting
Read Only, 2 =Allow Mounting Read/Write, 3 =Allow Mounting Read/Write if capacity less
than) is the frst parameter and size (corresponding to the desired maximum size of USB
device in MB, if 3 is chosen as the frst parameter) is the second parameter.
Te uninstall task must run as root on the target computer. Otherwise, it will not have
the sufcient permissions to uninstall all components of Device Filter Mac. If Device Filter
is installed on a machine that is also running Deep Freeze, the Mac must be in a Tawed
state for the uninstall to be successful. If Deep Freeze is in a Frozen state, Device Filter will
refuse the uninstall command and prompt the user with the reason.
Adding Targeted Computers to the Task List
Tis section has been written as a basic overview of how to use the Device Filter-specifc tasks in ARD.
For a more in-depth description of how to best utilize ARD and ARD tasks, please refer to your ARD
user manual or to the Help Files found within ARD itself.
In order to run a task, there must be computers targeted to run the task. To add one or more computers
to be targeted to run the task, complete the following steps:
1. In the lef column, double-click the task to be targeted to the specifed computers.
Te Task Edit window appears. At the bottom of the window is a dialog listing the
designated computers assigned to the task. Before a computer is added to the list, it reads No
Computers .
2. Drag and drop the preferred workstations or group of workstations into the dialog from the
computers in the All Computers list. Te number of computers assigned to a specifc task
appears at the bottom of the window.
3. Click Save.