Flowserve MEN - Manual (Page 32)

MEN USER INSTRUCTIONS ENGLISH 71576288 – 11-09
Page 32 of 36
®
7.2 Electrical faults
See Local signalization table (p.21)
If any problems are found the following sequence
of actions should take place:
a) Ensure equipment complies with the
recommendations in this manual.
b) Contact Flowserve if the problem persists.
If the problem renders the equipment in-
operational, the following safety precautions
must be taken:
- ensure that persons and equipment are
protected by applying the pre-defined
procedures together with the health and safety
department.
- have the work carried out by properly trained
and competent staff.
8 PARTS LIST AND DRAWINGS
Refer to the corresponding standard
pump instructions if the pump type used is different
to that indicated below.
8.1 Sectional drawings
8.1.1 MEN and MHP pumps
9331
MEN 80-65-250L
MEN 100-80-250L
MEN 125-100-250L
MHP 65-100-315
MHP 125-100-315