Flowserve VCT - Manual (Page 25)

USER INSTRUCTIONS APM, APMA and APH MX0301 - 07/03
Page 25 of 32
®
8.1.6 Suction bell with bearing
When suction bell bearing is provided, it is
permanently lubricated with water resistant
grease (Shell retinax AM, Alvania EP-2 or
Mobil grease special) which does not
require change during operation. When pump would be removed for
overhall maintenance and suction bell
bearing would be inspected and re-
installed then the cavity into the suction
bell must be filled with clean and new
grease.