Technical data – Flowserve NRGS15-1 User Manual
Page 10
10
– contin ued –
Technical data
Service pressure
25 barg at 224 °C
Connection
Screwed 1" BSP, DIN ISO 228
Materials
Screw-in housing:
1.4571, CrNiMoTi 17 12 2
Electrode rods:
1.4571, CrNiMoTi 17 12 2
Electrode insulation:
PTFE
Spacer disc:
PTFE
Terminal box:
polycarbonate
Electrode rods
Length supplied:
1000 mm
Diameter:
5 mm
Mains supply
220–240 V + 10 /-15%, 50/ 60 Hz
110–120 V + 10 /-15%, 50/ 60 Hz
24 V + 10 / -15 %, 50/60 Hz (optional)
Power consumption
3 VA
Sensitivity (at 25 °C)
Range 1:
0.5 µS/cm
Range 2:
10 µS/cm
The selection of the above range is done via a code switch.
Electrode voltage
20 Vss
Output
Four volt-free relay contacts.
Max. contact rating with a switching voltage of 24 V AC /DC, 115 V AC and 230 V AC:
resistive / inductive 4 A.
Ensure interference suppression by providing contactor with an arc suppressor RC com-
bination.
Contact material AgNi 0.15.
Energizing/de-energizing delay
Relay 1 and 2:
1 sec., factory set
Relay 3:
0- 30 sec., adjustable via potentiometer
Relay 4:
3 sec., factory set