Flowserve NRGS15-1 - Manual (Page 27)

27
Annex
– contin ued –
Installation in non-metallic vessel
The level switch electrode can also be installed in non-metallic vessels.
Note that in this case the electrode tip cannot be used for high level alarm but must be
used as reference electrode.
For this purpose plug the connection of the electrode tip into the free terminal lug for
the functional earth .
In addition, cut the electrode tip to the same length as electrode tip and strip off the
whole insulation.
Revised
Index D escription Date
00 New installation instructions 28 May 2004
4
4
N
4 1