Flowserve URB 2 - Manual (Page 35)

35
Menu Limiter
– continued –
Control unit
Note
For a list of all status messages for the equipment refer to chapter Status messages
Limiter (see page 39).
. To switch the display on or off press button .
The button in the symbol bar is highlighted.
The background of ON or OFF is flashing.
2. Turn the navigation wheel to ON or OFF. Press the
navigation wheel, the flashing will stop. The display
is switched on or off.
Limiter Lx
Note
To ensure a quick search for malfunctions we recommend that all available limiters are
switched ON.
Should a malfunction occur check the plausibility of the system configuration.
. To switch the display on or off press button .
The button in the symbol bar is highlighted.
The background of ON or OFF is flashing.
2. Turn the navigation wheel to ON or OFF. Press the
navigation wheel, the flashing will stop. The dis-
play is switched on or off.
3. Limiters that are switched on are shown in the list
“Limiters”.
Device name
Control unit Limiter L1 Limiter L2
Control unit OFF
Device name:
SW–version:
Alarm:
Status message:
No errors
Device name
Control unit Limiter L1 Limiter L2
Limiter L1 OFF
Device name:
SW–version:
Alarm:
Status messages:
Device name
Control unit Limiter L1 Limiter L2
Control unit OFF
Device name:
SW–version:
Alarm:
Status message:
No errors
Device name
Control unit Limiter L1 Limiter L2
Limiter L1 OFF
Device name:
SW–version:
Alarm:
Status messages: