Flowserve URB 2 - Manual (Page 9)

9
Installation
URB 2
Fig. 3
Functional Elements
URB 2
The operating and display unit URB 2 is designed for installation in control cabinets.
. Provide cut out in control cabinet, dimensions 74 x 45 mm, max. sheet thickness 0 mm.
2. Unscrew the white fixing nuts
D and remove the back of the housing C. If necessary you can also
unscrew the stud but not more than 35 mm.
3. Put the operating and display unit URB 2 A into the cut-out, replace the back of the housing C,
screw in and tighten the fixing nuts D.
GESTRA URB 2
PUS H
Home Control Limiter
Level
45 %
Conductivity StdBy
MAX 6000
ACT. 4800 µS/cm
Pressure
MAX
ACT. bar
Temperature
MAX 300
ACT. 150 °C
1 2 1
A
3