Flowserve OR 52-7 User Manual
Page 4
4
Important Notes
Usage for the intended purpose
The GESTRA Turbiscope OR 52-7 is designed for the continuous monitoring and detection of oil
contamination of water and used in conjunction with oily water separators as 5 ppm bilge alarm.
The equipment meets the requirements of the International Maritime Organization (IMO) for bilge alarm
monitors, MEPC. 07 (49).
Danger
The solenoid of the solenoid valve Clw can reach up to 80 °C during operation.
The terminal strips of the measuring transducer ORT 7 can be live during operation.
This presents the risk of electric shock.
Cut off power supply before mounting, removing or connecting the terminal strips.
Safety note
The equipment must only be installed and commissioned by qualified and competent staff.
Retrofitting and maintenance work must only be performed by qualified staff who – through adequate
training – have achieved a recognised level of competence.