Fluke Biomedical DPM1B - Manual (Page 11)

1
Introduction
This document is the Operators manual for the DPM1B Pneumatic
Transducer Tester (hereafter “the Tester”). It contains general
information about the Tester, a description of its components and
instructions or documentation required to service the unit. If a problem
develops, the user should contact Fluke Biomedical.
 Caution
The user should never attempt to service the unit before
consulting with Fluke Biomedical service personnel.
Safety
The Tester draws only 7 mA of current during operation; however, it is
often connected to electrical equipment. Follow the manufacturer’s
electrical safety guidelines for equipment attached to the Tester.
A Warning identifies conditions and procedures that are dangerous to
the user. A Caution identifies conditions and procedures that can
cause damage to the Product or the equipment under test.
 Warning
To prevent possible electrical shock, fire, or personal
injury:
• Use the Product only as specified, or the
protection supplied by the Product can be
compromised.
• Read all safety information before you use the
Product.
• Carefully read all instructions.
• Remove the battery if the Product is not used for
an extended period of time, or if stored in
temperatures above 50
° C. If the battery is not
removed, battery leakage can damage the
Product.