Fluke Biomedical DPM1B - Manual (Page 24)

DPM1B
Operators Manual
14
Maintenance
 Warning
For safe operation and maintenance of the product
and to prevent possible electrical shock, fire, or
personal injury:
• Repair the Product before use if the battery leaks.
• Be sure that the battery polarity is correct to
prevent battery leakage.
• The battery contains hazardous chemicals that
can cause burns or explode. If exposure to
chemicals occurs, clean with water and get
medical aid.
• Do not disassemble the battery.
• Do not disassemble or crush battery cells and
battery packs.
• Do not put battery cells and battery packs near
heat or fire. Do not put in sunlight.
• Do not short the battery terminals together.
• Do not keep cells or battery in a container where
the terminals can be shorted.
• Remove the input signals before you clean the
Product.
• Use only specified replacement parts.
• Have an approved technician repair the Product.
Cleaning Outside Surfaces
The DPM1B outside surfaces can be cleaned with a cloth dampened
with water and mild detergent or alcohol.
Battery Replacement
The battery compartment of the Tester is found in the rear panel of the
tester. Slide the compartment cover to expose the battery holder.
Replace with one 9 V alkaline battery.