Fluke Biomedical DPM1B - Manual (Page 13)

Pneumatic Transducer Tester
Introduction
3
Symbols
Table 1 is a list of symbols found in this manual or on the Tester.
Table 1. Symbols
Symbol Description
 Risk of Danger. Important information. See Manual.
 Conforms to European Union directives

Conforms to relevant Australian EMC standards

Battery

This product complies with the WEEE Directive (2002/96/EC)
marking requirements. The affixed label indicates that you
must not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and Control Instrumentation"
product. Do not dispose of this product as unsorted municipal
waste. Go to Fluke’s website for recycling information.
Manual Objectives
• Information about the design of the Tester to enable the user to
understand its use.
• Detailed guidance for maintaining and storing the unit.
• Procedures for setting up and operating the Tester.
Summary of Features
The Tester is a hand-held pressure measuring device, designed as an
aid in the performance testing and troubleshooting of pneumatic or
hydraulic systems. A liquid crystal display (LCD) reading indicates
pressures manually generated from an internal chamber.
Testing blood pressure transducers is easy: Simply connect a BP
transducer to the luer lock fitting on the Tester and create any series of
pressures between
± 300 mmHg. Pressures can then be compared
directly between the Tester and the manometer or monitors under test.