Fluke Biomedical QA-ES II - Manual (Page 19)

Electrosurgical Analyzer
Controls and Connections
9
Table 2. Controls and Connectors
Item Name Description
A
LCD Display Shows messages, test results, and function menus.
B
Cancel Cancels a new value and returns to previously chosen value.
C
Encoder Used to set value according to the specified range and chooses between different
operations and measurement ranges.
D
Enter Admits newly specified information.
E
Power Switch Switches the power on and off.
F
Scope Output Connector BNC cable connector for attenuator signal in real time when you require
oscilloscope output.
G
Remote Indicates that you have pressed REMOTE CONTR. (F4).
H
RF-Detect Indicates an activated ESU.
I
Function Keys Fl through F5 each selects the function shown directly above the key on the bottom
line of the LCD display.
J
Terminals
GREEN and GREEN Used for the foot switch output to trigger the ESU. Refer to “Foot Switch Control”
later in this manual.
K
Terminals
WHITE and WHITE Used for additional fixed load resistance of 200 • FIXED LOAD, 400 W for serial
connection during leakage test.