Fluke Biomedical VT305 - Manual (Page 29)

Gas Flow Analyzer
Connect the Product
15
Connect the Product
Refer to Figure 12 when you do the subsequent steps.
1. Always use the dust filter.
2. Connect the tube system.
Note
Avoid tight bends, kinks, or dents in the tubing.
3. Connect the test lung.
4. Connect the breathing apparatus.
For more information on how to connect the breathing
apparatus, see the How to Measure Respiratory Data
section.
Flow
Direction
Good Setup
gyo053.eps
Figure 12. Product to Breathing Apparatus Connections