Formax FD 6100 - Manual (Page 24)

23 Using the machine
4125603C/B
10/10/2003
2. USING THE MACHINE
To use the machine, the following must be specified:
- type of document
- type of envelope
- feeder trays being trays
This information is saved by the machine as a "job",
corresponding to a specific application. There are nine (9) jobs
which can be stored in memory for later recall.
Fill the tray or trays concerned, depending on the task to be
performed (see section entitled “loading documents”).
2.1 User Mode
When the user menu appears, the machine is ready for use.
Selection area Modification area
READY : START to process a job
or to select line to modify
Counter : 1 2 3 4
Job number : 02
Feeder : AUTO A+B+C
Document : LETTER 11"
Envelope : # 10 SEAL
Address height : +0 mm