4 using flat rolls – Formax FD 280-20 User Manual
Page 17
Advertising
6/10
13
5.4 Using Flat Rolls
The maximum diameter of the roll to be fed is 12”.
1. Arrange the flat roll (s) on a common shaft.
2. Lock the rolls in place using the collars provided.
3. Slip the end plates on the shaft.
4. Place the assembly on the FD 280-20.
Using this method, it is possible to have a variety of
tabs stored in flat rolls on the FD 280-20 until needed.
Figure 5.2 Flat Roll Set Up
Advertising