Formax FD 280-20 - Manual (Page 19)

6/10 15
6. MAINTENANCE
6.1 General
Cleaning
Your FD 280-20 will need regular cleaning. How
often depends on the amount of use. Wipe surface
dust or debris from the FD 280-20 with a damp cloth
as necessary.
Watch for wear on the spool ends. If they become
worn and flattened, replace them.
WARNING
DO NOT PLACE FINGERS OR TOOLS BETWEEN
OR NEAR MOVING PARTS.
6.2 Replacing a
Fuse
6.2.1 Line Fuse
When one or both LINE FUSES are blown, the
FD 280-20 will appear to have no power and the
LINE FUSE must be replaced.
WARNING
UNPLUG THE POWER CORD BEFORE OPENING
THE FUSE DRAWER.
To replace a LINE FUSE:
1. Use a small screwdriver or similar tool to push up
on the FUSE DRAWER LOCKING TAB to release
this locking tab. (Refer to Figure 7.1.)