Formax FD 280-20 - Manual (Page 5)

6/10 1
1. INTRODUCTION
1.1 Organization Of
This Operating
Manual
This manual includes a description of your
FD 280-20, set up, operation, maintenance and
troubleshooting. There are many helpful tips along
the way, and it is strongly suggested that you become
familiar with this entire manual prior to operating the
FD 280-20.
1.2 FD 280-20
Description
The Formax FD 280-20 may be used as an accessory
label feeder for many labeling machines or printers.
In this manual the FD 280-20 is described as a part of
a system featuring the Formax FD 280 tabbing
machine.
The FD 280-20 is equipped with a dolly using locking
casters. Place it in position and lock the casters.
Rolls of tabs are placed between spool end plates
(included) and mounted on the FD 280-20. The web
of tabs is then threaded through the FD 280-20 and
up to the FD 280. One strip of tabs may be spliced to
another.
As the tabber uses tabs, the FD 280-20 automatically
unrolls more tabs as needed. At the end of the spool,
the FD 280-20 goes into an error state and shuts
down the FD 280
’s feeder.
The FD 280-20 has a unique feature that facilitates its
use as a part of a tabbing or labeling system. The
Accessory Power Outlet is switched and controlled by
the operation of the FD 280-20. Typically, the FD
280-20 receives its power from the FD 280. It then
supplies all upstream equipment based on the FD
280
’s transport. When the FD 280 is capable of
running material through it, the FD 280-20 and the
feeder will run in turn. Stop the FD 280
’s transport
with the E-Stop switch and all upstream modules stop
as well.