Foxconn A76ML Series - Manual (Page 103)

96
5
7. After PC starts, the RAID array is now ready to be initialized under Windows.
Launch Computer Management by clicking Start -> (Settings ->) Control Panel then
open the Administrative Tools folder and double click on Computer Management.
Click Disk Management (under the Storage section).
The Initialize and Convert Disk Wizard appears. Click "Next" to continue.
The RAID array is named as Disk1 and its status is unknown and not initialized.
8. A "Select Disks to Initialize" window will appear. The disks listed depend on how
many arrays you have configured. Select "Disk1" and click "Next" to continue.
9. When "Select Disks to Convert" window appears, do not select anything and click
"Next" to continue.
10. When the "Completing the Initialize and Convert Disk Wizard" window appears,
click "Finish" to complete the wizard.