Foxconn A76ML Series - Manual (Page 28)

21
3
System Information
This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
System Information
Date (mm:dd:yy) [Wed , 09/25/2008] Help Item
Time (hh:mm:ss) [11 : 59 : 49]
► Primary IDE Master [Not Detected] Use [Enter], [TAB]
► Primary IDE Slave [Not Detected] or [SHIFT-TAB] to
► SATA1# [Not Detected] select a field.
► SATA2# [Not Detected]
► SATA3# [Not Detected] Use [+] or [-] to
► SATA4# [Not Detected] change system Date.
Floppy A [1.44 MB 3 1 /
2
]
Halt On [All Errors, But ...]
Keyboard [Enabled]
Mouse [Enabled]
Floppy [Disabled]
Model Name : A7VML/A76ML Series
BIOS Version :D07
Memory :256M
MAC Address :00-E0-4C-36-00-02
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit
F1:General Help F9:Optimized Defaults
09
► Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► Primary IDE Master/Slave, SATA1#/SATA2#/SATA3#/SATA4#
While entering setup, BIOS automatically detects the presence of IDE devices, and you can
enable or disable the related mode and technology for the relevant device. This item
displays the drive information of IDE devices.
► Floppy A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [Disabled], [360KB, 5
1 /
4
"], [1.2MB, 5 1 /
4
"], [720KB, 3 1 /
2
"], [1.44MB, 3 1 /
2
"] and [2.88
MB, 3 1 /
2
"].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse or floppy can result in system halt. The