Internal graphics config – Foxconn A76ML Series User Manual

Page 39

Advertising
background image

32

3

This item allows you to select a delay time (in clock cycles) between sending the last data from
a write operation to the memory and issuing a read command.

► tRFC0, 1, (Auto-Refresh-to-Active/Auto-Refresh Command Period)

Refresh to Refresh or Refresh to Active command interval.
Trfc1: auto-refresh row cycle time for logical DIMM 1
Trfc0: auto-refresh row cycle time for logical DIMM 0

Internal Graphics Config.

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

Internal graphics Config.

Internal graphics Config.

Help Item

Internal Graphics Mode

[Enabled]

UMA Frame Buffer Size

[128MB]

Primary Video Controller

[PCI-GFXO-IGFX] Disabled

Surround View

[Disabled]

Enabled

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit

F1:General Help F9:Optimized Defaults

[Enabled]

Options

► Internal Graphics Mode

Enable/Disable the integrated UMA graphics controller.

► UMA Frame Buffer Size

Allocates system memory for use as video memory to ensure the most efficient use of
available resources for maximum 2D/3D graphics performance.
This is a memory allocation method addition to the Unified Memory Architecture (UMA)
concept, wherein a static amount of page-locked graphics memory is allocated during driver
initialization. This fixed amount of memory will provide the user with a guaranteed graphics
memory at all times, and will no longer be available to the OS.

► Primary Video Controller

This item is used to select which graphics controller is used as the primary boot device.

► Surround View

Surround View is the ATI technology that provides multi-graphics controller display capability
for both the ATI PCIe-based graphics card and the ATI integrated graphics processor (IGP).
Enabling SurroundView does not impact display modes (resolution and color depth) or perfor-
mance. The display mode of each output is controlled independently by the graphics controller
connected to it.
1. When using a non-ATI PCI Express (PCIe) graphics card, Surround View is not supported.

The integrated graphics processor (IGP) is automatically disabled, and the system memory
allocated to the IGP is freed for other use.

2. PCIe graphics card is the default first display device.

Enabling SurroundView in the BIOS

Advertising
This manual is related to the following products: