Fronius String Control 250/25 DCD DF - Manual (Page 82)

24
3
1
3
DA
TCOM IN
DA
TCOM OUT
2
1
3
1
2
2
IN OUT 1 2
4
2
1
3
Connecting RJ
45 Data Com-
munication
Cables to the
Fronius String
Control 250/25
DCD DF
NOTE Procedure when only 1 data communication cable is being
connected to the Fronius String Control 250/25 DCD DF (e.g.,
when the Fronius String Control 250/25 DCD DF is the last com-
ponent in a Solar Net):
-
Insert the termination plug in the free RJ 45 connection. The
termination plug is part of the scope of supply of the Fronius
Datalogger.
- Insert the plastic bolt in the free opening of the rubber insert
(included in the scope of supply for the Fronius String Control
250/25 DCD DF).
Tightening torque 5 Nm
* Silicon tube 510 mm
*
*