FSR HUDDLEVU BRACKET SET - Manual

FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43047 LIT1474A
HuddleVU BRACKET SET INSTALLATION INSTRUCTIONS
1. LOOSEN BASE PLATE SCREWS AND SEPARATE
BASE PLATE FROM TABLE BRACKET. DETERMINE
EQUIPMENT LOCATION AND MOUNT TABLE
BRACKET TO UNDERSIDE OF TABLE WITH
SUPPLIED #8 WOOD SCREWS OR CUSTOMER
SUPPLIED #8 COUNTER-SUNK HARDWARE.
TABLE BRACKET
(4) #8 COUNTER-SUNK HARDWARE
2. REMOVE AND DISCARD EXISTING SCREWS FROM
HV-CTL UNIT.
3. INSTALL HV-CTL TO BASE PLATE WITH SUPPLIED
#6 HARDWARE.
HV-CTL
REMOVE AND DISCARD
BASE PLATE
TABLE
(4) #6-32 x 3/8" LONG
PAN-HEAD SCREW
6. REINSTALL BASE PLATE ASSEMBLY TO TABLE BRACKET AND
MAKE ELECTRICAL CONNECTIONS AS REQUIRED. TIE-WRAP
CABLES TO TIE-TABS AS REQUIRED.
(11) TIE-TAB
INSTALLED
TABLE BRACKET
BASE PLATE ASSEMBLY
TIGHTEN SCREWS
AFTER REINSTALLING
BASE PLATE ASSEMBLY
TO TABLE BRACKET
HV-CTL UNIT CAN BE
REMOVED WITHOUT
REMOVAL OF BASE
PLATE ASSEMBLY
OPTIONAL
PILOT HOLE
PATTERN
12.60
4.50
7.43
BE SURE TO PLAN FOR
WIRING / CABLE ROOM IN
FRONT & BACK OF ASSEMBLY