FSR TS-400 - Manual

SECTION A-A
SECTION B-B
FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43218 LIT1422
A
A
B B
TS-400 WITH COVER
TS-400 WITHOUT COVER
1. DETERMINE LOCATION OF TS-400 ASSEMBLY AND REMOVE APPROPRIATE KNOCK-OUT PANELS FOR WIRES/CONDUITS
ROUTED TO THE TS-400 UNIT. USE THE TS-400 CHASSIS AS A TEMPLATE TO TRANSFER THE .328 DIAMETER HOLE
PATTERN TO WALL AND CEILING. HOLES USED TO SECURE CHASSIS WILL BE DETEREMINED ON SITE BY INSTALLER.
INSTALLER TO PROVIDE HARDWARE OR USE SUPPLIED TOGGLE BOLTS.
CEILING
WALL
CEILING
WALL
.328 DIA. HOLES
14 POSSIBLE WALL
MOUNTING HOLES
.328 DIA. HOLES
15 POSSIBLE CEILING
MOUNTING HOLES -
IF CEILING MOUNT
IN LIEU OF WALL
MOUNT, MUST
SECURE TO
STRUCTURAL
MEMBER
CEILING CEILING
WALL
WALL
TS-400 - MAXIMUM
EQUIPMENT
LOAD - 50 LBS
WALL
SHEET ROCK (1/2" MIN) / METAL STUD APPLICATIONS - WALL ANCHOR LOCATIONS - 6 TOP ROW, 2
BOTTOM ROW, MINIMUM 16" SPAN
SHEET ROCK (1/2" MIN) / WOOD STUD APPLICATIONS - LAG BOLTS WITH WASHERS MAY BE USED TO INSTALL
TO WOODEN STUDS. WALL ANCHOR LOCATIONS - 2
TOP ROW, 2 BOTTOM ROW, MINIMUM 16" SPAN
BLOCK CONSTRUCTION - USE APPROPRIATE ANCHORS OR PROVIDED TOGGLE
BOLTS. WALL ANCHOR LOCATIONS - 2 TOP ROW, 2
BOTTOM ROW, MINIMUM 16" SPAN.
WALL
CEILING
TS-400 INSTALLATION INSTRUCTIONS