FSR CB-224/224S - Manual

FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43972 LIT1364A
CB-224/224S INSTALLATION INSTRUCTIONS
8. INSTALL 19-3/8" x 22-3/4" DROP CEILING MATERIAL (SUPPLIED
BY CUSTOMER) INTO DOOR. BEND CAPTURE TABS OVER
CEILING PANEL TO HOLD IN PLACE.
19-3/8" x 22-3/4" DROP
CEILING PANEL MATERIAL
(SUPPLIED BY CUSTOMER)
(4) CAPTURE
TAB
TO INSTALL AC MAIN POWER INTO THE UNIT, REMOVE THE AC
ACCESS PLATE BY REMOVING (4) #8-32 SCREWS, AS SHOWN.
WIRING MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN
ONLY. WIRING MUST BE DONE IN ACCORDANCE WITH ALL NEC
AND OTHER APPLICABLE CODES. RE-INSTALL AC ACCESS
PLATE AFTER AC WIRING IS COMPLETE.
2.
FSR Inc.
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 - Fax: 973.785.4207
Web: www.fsrinc.com - E-mail: [email protected]
CEILING TILE INSTRUCTIONS
(4) #8-32 x 1/4"-LONG
PAN HEAD SCREW
AC POWER INPUT WIRING MUST BE
PERFORMED BY A QUALIFIED
ELECTRICIAN ONLY
AC ACCESS
PLATE
LOOSEN SCREWS
TO OPEN DOOR
ROUTE CONDUIT
(SUPPLIED BY
CUSTOMER) TO
KNOCKOUTS
AS REQUIRED
THREADED ROD OR CABLE TO
BE PLUMB WITH CEILING AND FLOOR
14 GA. STEEL TIE WIRE MAY BE USED
(SUPPLIED BY CUSTOMER OR USE FSR KIT)
AT 70,000 PSI TENSILE STRENGTH OR
BETTER AS REQUIRED BY BUILDING CODES.
NOTE: WIRES SUPPORT CEILING
BOX, AND ARE NOT SAFETY CABLES
STRUCTURAL
CHANNEL
ALL MOUNTING HARDWARE
SUPPLIED BY CUSTOMER
STRUCTURAL
MEMBER
BRACKET - FSR'S
THREADED ROD
INSTALLATION KIT
(HARDWARE SUPPLIED
BY CUSTOMER)
1. INSTALL CB-224/S TO A STRUCTURAL CEILING ABLE TO
SUPPORT FIVE TIMES THE NOTED GROSS WEIGHT. USE
APPROPRIATE MOUNTING METHODS BASED ON LOCAL
BUILDING CODES. INSTALL SAFETY CABLE AS REQUIRED BY
LOCAL BUILDING CODES. ROUTE CONDUITS TO BOX AS
REQUIRED.
NOTE: MAXIMUM GROSS WEIGHT - 125 LBS
NOTE: THREADED ROD IS THE
RECOMMENDED CEILING BOX
MOUNTING SUSPENSION
(SHOWN), TO MINIMIZE
FIXTURE TILTING DUE
TO THE WEIGHT OF ANY
SUSPENDED EQUIPMENT.
AVAILABLE KITS (SOLD SEPARATELY):
CB-MNT1 - CABLE INSTALLATION KIT
CB-THRD - THREADED ROD INSTALLATION KIT